Shiv Bhoi

I enter the code in UNO . I connect the 1-Digit Seven-Segment Display . In this challenge the number blink in reverse .

I enter the code in UNO . I connected the 1-Digit Seven-Segment Display and push button to UNO . When I push the push button the number change .

I enter the code in UNO . I learn how is the connection of Seven Segment Display .

I change some code and enter in UNO . I connect the 3 sensor to ardiuno by jumper wire . when the sensor detect the motion , high temperature and low light the led and the buzzer start .

Connect a temperature sensor to A0. Read the sensor value, convert it to °C, and show it on the Serial Monitor. Warm or cool the sensor and observe the temperature change.

I enter the code in UNO . I connect the led , buzzer and PIR motion sensor to UNO with jumper wire . When the sensor detect the motion the led and buzzer start .

I enter the code in UNO . in this challenge when PIR Motion Sensor detect motion the led start and when no motion the led stop .

I enter the code in UNO . In this challenge when object come near the buzzer start .

I enter the code in UNO . When the object come near the led start . And when the object far away the led stop.

I connect the HC-SR04 Ultrasonic Sensor to Arduino . I enter the code . WHen I move my hand front of sensor the distance is change and display in Serial monitor .

I connect the LDR sensor to uno . I upload the code . I pic threshold .

I connect the LDR sensor and LED to uno by jumper wire . When light glow the led is not blink but when light glow down the LED blink .

I connect LDR sensor to uno . I see the Serial monitor . When I cover the LDR the value change in 31 around to 1023 .

I enter the code in uno . When I press the button the led blink in different return.

I enter the code in uno. when I rotate the Potentiometers the led change the colure.

I change the code . When I rotate the Potentiometer led1 blink when more rotate led 1 stop blink and led2 blink.

I enter the code in arduino . I change the values of Potentiometer 0 to1023.

I change the code . It help tu me in control the leds blinking speed by potentiometer.

In this challenge I use potentiometer for blink led when I rotate the potentiometer led is start to blinking .

I enter the code in arduino . this code with we work when I push button the buzzer is start to buzzering.

I upload the code to arduino. in this code when I press button led blinking continuously and when I press second time button led stop to blink.

I connect the led with button to arduino by jumper wire. when I press the button led is blink.

I connect led to arduino 5v and gnd. Yes the led continues blink.

I change the code in this code led blink turn by turn but with speed.when the led blink in speed my challenge complete.

I change the code and upload in arduino. in this challenge led 1 and 3 blink then 2 and 4 blink . when that work my challenge is done.

I change the code and enter in arduino. in this code the led blink turn by turn in pattern in speed. I connect 4 led to arduino .

I change code first led 1. blink then 2 then 3 ... and of last all led stop to blink

I change the code in this code led 1,2 blink then led 3,4 blink and then led5,6 blink.

I change the code then leds blinking speed slowdown. when 4 led blink slowly in turn by turn. My challenge is complete.

I connect 8 led to arduino by jumper wire. in this challenge all led blink turn by turn.

In this challenge code is change then I enter in arduino. I connect the arduino to breadboard. and when leds blink in turn by turn.

in this challenge the led 12 blink then led13 blink and then these stop to blink. these leds blinking in pattern.

I change the code . in this code is when led 1 blinking anther is not blink . and when anther blink led 1 stop.

I change the code and enter in arduino. then leds blinking speed increase.

I change the code and made pattern. enter the code in uno. When led blink in pattern my challenge done.

I change delay time 1000 to 500 and enter the code in uno; led starts blinking

I opened Arduino IDE, changed both delay(1000) values to delay(2000), uploaded the code to the Arduino board, and verified that the LED stayed ON for 2 seconds and OFF for 2 seconds. This confirmed that the project was completed successfully."

First, I fit 8 LEDs on the breadboard, then connected them to Arduino using jumper wires, and completed my challenge.

First, I placed five LEDs on the breadboard and connected them all. When the LEDs blink, my challenge was complete.

I blink 4 led on breadboard by jumper wire. when they blink the challenge is done.

I blink 2 led on breadboard by jumper wire. When leds blink my challenge 3 is complete.

I blink led on breadboard using jumper wire. when led blink my challenge 2 complete.

I blink LED by arduino bord. The challenge is blink your led so when blink my led I understand my challenge 1 is done.